Products - CARBOVAM - Injection Pastes

CARBOVAM AF SICOR
The carbonaceous paste, cold application, injected under pressure, fills the voids in the layer of pounded paste, stops the passage of gases and reestablishes the thermal connection between the refractory lining and the cooling system, allowing for the prolongation of the crucible campaign.

CARBOVAM PI Q SICOR
Due to its flow characteristics, the paste penetrates through cracks and fills cavities formed in refractory coatings, solidifying by heating and restoring its integrity. Composed of carbonaceous material also contributes, by its thermal conductivity, to the improvement of the conditions of thermal exchanges. Its use is recommended for the recovery of coatings of iron alloys and pig iron furnaces. Its application with injection machine must be done after heating from 80 to 110 °C, when it acquires the ideal viscosity.

CARBOVAM AF SICOR
The carbonaceous paste, cold application, injected under pressure, fills the voids in the layer of pounded paste, stops the passage of gases and reestablishes the thermal connection between the refractory lining and the cooling system, allowing for the prolongation of the crucible campaign.

CARBOVAM AGL
Intended to prepare surfaces on which cold or hot coating pastes are applied, the bonding agent penetrates the porosities of the coating surface enabling better anchoring of the carbon paste to be punched.

CARBOVAM ECA
Anthracite electrically calcined for furnace buffering for the production of calcium silicon and other uses.
Copyright ©2017 - VAMTEC VITORIA SA
Design by: aldabra